Your feelings are valid. You are not alone.

Reply To: Need a UN approved IBC tank for coolant storage

Asha’s Conversation › Forums › Opening Up & Venting › Need a UN approved IBC tank for coolant storage › Reply To: Need a UN approved IBC tank for coolant storage

#28615
Jasmine Coleman
Guest

Something nobody tells you upfront is that the UN approval on an IBC is only valid for the tank as a complete assembled unit, if you ever replace the inner bottle separately or fit a non original valve the approval technically no longer applies because the certification was issued for the specific combination of components that were tested together. This is why buying from a supplier who can actually provide matching replacement parts matters more than it seems when you are just starting out. For coolant recycling the inner bottle should be at least 3mm thick HDPE with UV stabiliser added because even indoor storage in the Gulf involves significant radiant heat exposure that degrades unstabilised HDPE faster than most people expect. Crateco carries UN approved IBC tanks suited for industrial fluid storage and their range covers the specs relevant to coolant and similar non aggressive fluids without pushing you toward overspecified chemical grade tanks you do not need. One practical thing I would add is to always store your filled IBCs on a drip tray rated for the full tank volume, not because leaks are likely with a good tank but because a regulatory inspection or an insurance assessment will flag the absence of secondary containment even if you have never had a single drop hit the floor.